Manufactures And Expoter of Scaffolding And Form Work System
4Vertical Shores Props
4Adjustable Jack
4Scaffold Coupler Fittings
4Cuplock Scaffoldings
4Colum/Beam Clamps
4Decking System
4Solider System
4Form Work System
4Scaffold Tubes
4Other Product
4Contact us
CUPLOCK is a proven multipurpose scaffolding system which can be used for all forms of access and support structures in the building and construction industries.
Provides major savings in erection and dismantling times thus minimizing on site cost. It can be erected 75 faster than traditional scaffoldings. When not in use, its modular constructions ensure minimal space requirements for storage.
The success of cuplock lies in the node point or fastening method. Four horizontal can be fastened at one time making a very rigid connection. The horizontal bear directly on the verticals and are firmly clamped by the action of the cup. There are no loose parts to lose. The rigid node point allows for high horizontal loads experienced with a 57kN leg load.
When investing in equipment's it must be as versatile as possible. Cuplock can be erected for straight, curved and circular configuration for both access and support, and for independent and mobile towers.
With no loose parts and with corrosion protection it can be easily stored and maintained. Designed to be tough, cuplock is highly resistance to damage. When not in use, it's modular construction ensure minimal space requirement for storage


Locate the blade end of orizontals into lower
Lower the upper cup down
Tighten with a hammer blow
A positive & rigid connection of four units is achieved in one single action.
2005. Metals And Metas International. All Rights Reserved.