Manufactures And Expoter of Scaffolding And Form Work System
4Vertical Shores Props
4Adjustable Jack
4Scaffold Coupler Fittings
4Cuplock Scaffoldings
4Colum/Beam Clamps
4Decking System
4Solider System
4Form Work System
4Scaffold Tubes
4Other Product
4Contact us
FLOOR / SLAB FORM

Manufactured out of 14 gauge sheets with pressed flanges and stiffner. Available in standard

Sizes of
1150x600,
900x600,
1150x300 & 900x300 mm.
Other sizes available on request

Floor/Slab Form Adjustable eliminate use of cut pieces of timber, as these can fill up odd shapes of slab. Available in standard :

Sizes of 1150 x 400,900 x 400 and 600x400mm



WALL FORM SYSTEM

Manufactured out of 12 Gauge (2.5mm) sheet & angle 45x30x 4mm & rectangular slots are provided on angle at every 50 mm C/C .
Standard Sizes:
# 1250x500mm
# 1250x400mm

WALLFORM ACCESSORIES
Assembly Nut & Bolt.
- Single Clamp.
- Bridge Clamps.
- Wedge Clip
- Tie Bolt
- 12, 16 and 20 mm dia.
- Plastic Cone
- 12, 16 and 20 mm dia.
- Spring Coil
- 12, 16 and 20 mm dia

INTERNAL COUPLERS AND JOINT PINS

Joint Pins fittings designed with the utilities as the leeve coupler except that is connected internally and to tapered to allow ease of joining.


ANGLE PANEL/FLAT PANEL/ SHUTTERING PLATE
Manufactured out of 10 Gauge(3.1mm) or 12 gauge (2.5mm) sheet and angle 35 x 35 x 5 or 35 x 5mm Flat
Sizes as required by the customer
s.
PIPE-MOUNT SWIVEL JACKS - HAMMERBLOW -TOPWIND
For industrial and agricultural applications, the following Hammerblow Pipe Mount Jacks come complete with the inner weld-on pipe swivel bracket that attaches to the railer. Painted outer tube, zinc plated inner tube
SPIGOT
When necessary Vertical are connected end to end by an internal Spigot (Square / Round). This is bolted to the lower Vertical
Steel Platform

Uttam steel platforms have been carefully designed and developed to provide a solid suitable working platform that complies with all the relevant safety regulations.

 



2005. Metals And Metas International. All Rights Reserved.